Laminate Flooring Questions

Q. A couple of laminate flooring questions.

1. I installed laminate in our living room and since then the stick-on tiles in the dining room are peeling up on the edges. I've decided to put down laminate floor in that room as well. I have a reducer molding between the living room and dining room. I'm going to have to replace it with a T molding and will have to remove it before starting the dining room for spacing. How do I remove it? Jig saw?

2. I'm also installing laminate in our master bathroom. Is it necessary to glue the glueless click planks because of moisture?

A. 1. Without actually seeing the installation a saber saw is probably your best bet. Although a circular saw set at the right height is easier to maintain a straight line.

2. DO NOT glue the glueless planks - they need freedom to expand and contract. Glue them and you will have no end of buckling problems. I am not sure I understand the part about "moisture" in the master bedroom. If you have a moisture problem in your home, you should fix the problem rather than trying to remodel around the problem.

Link