logo

Home
Main Index

Translate This Page

 

Bathroom Plumbing

Bathroom Plumbing Supply & Drainage Systems - Part 1

Part 2

The most complex part of any residential plumbing system is located in the bathroom. If the rough-in portion of the plumbing is not installed properly, the homeowner will have no end of problems, that include water hammering, sinks and lavatories that drain slowly or create gurgling sounds and sewer gases entering the home - a true health hazard.

If you are remodeling your bathroom (Figure 1) it is important that you understand the methods of installing and connecting supply and drainage water systems in your home.

bathroom

Figure 1 - Remodeled bathroom

Drainage:

A basic drainage system comprises two parts:

  • The pipes that remove the water from plumbing fixtures.
  • The pipes that vent the drainage system allowing for the free flow of water and removal of any toxic gases that may enter the drainage system.

In older homes the drainage systems used cast iron piping. New systems use PVC piping. PVC is easier to work with and has a much longer life as there is no corrosion with plastics.

cast iron to pvc coupling

Figure 2 - Cast iron to pvc coupling

If you are connecting to cast iron or galvanized piping there are fittings made to make the conversion air and water tight. The fittings are available as straight connections and as reducers in a variety of sizes. Remember that the outside diameter of a cast iron pipe is larger than the outside diameter of a PVC pipe of the same size.

Note: These types of couplings are not designed to support a lot of weight. If you are installing this type of fitting in a horizontal pipe, the pipe should be supported on both sides of the fitting with proper pipe hangers.

cast iron to pvc reducer suspended from joist

Figure 2 - Proper suspending of a cast iron to PVC coupling installed horizontally

If you are installing the coupling in a vertical pipe the weight of the pipe should be supported independent of the coupling, as shown in Figure 2. There are many variations on how you might support the pipe depending on how it actually runs in your home. Figure 3 is an example of how a vertical drain pipe might be supported.

supporting a cast iron to pvc vertical pipe installation

Figure 3 - Proper suspending of a cast iron to PVC coupling installed vertically

Bathroom Drainage & Venting System:

Not providing proper and adequate venting is usually the biggest mistake that the home handyman makes when installing or moving parts of a drainage system.

Continued......

Share |